Cleaning machine×ソマックス - List of Manufacturers, Suppliers, Companies and Products

Optical Component Mold Cleaning Machine "Kuripika Ace OPT"

Brightness recovery and yield improvement. With the optical component mold cleaning machine "Cripika Ace OPT," you can perfectly remove dirt from molds for optical components such as light guide plates and lenses!

＼Contactless cleaning!／ The mold cleaning machine for optical components, 'Clipika Ace OPT,' perfectly removes dirt adhered to delicate optical molds without causing any damage. It addresses gas burns and resin stains, ensuring that even nano and micro-level dirt is not missed. 【Conventional maintenance of optical component molds】 ● Performed manually using cotton swabs and other tools ● Requires utmost care as it is prone to scratches ● May not completely remove all dirt ● Concerns about the burden on the body due to the use of organic solvents 【Clipika Ace OPT】〇 Automatically cleans molds arranged in a dedicated basket 〇 Allows for contactless cleaning 〇 Cleaning solution penetrates every corner of the mold, lifting and removing dirt 〇 Uses a water-based cleaning solution that has low environmental impact and does not contain organic solvents We offer a lineup tailored to the size of the molds. *For details, please refer to the "Lineup."

Company：ソマックス
Price：Other

Other cleaning machines
Ultrasonic Cleaner
Other molds

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Removal of gas burns and residues such as resin from molds! 【Kuripika Ace Cleaning Case】

The mold cleaning machine Kripika Ace is effective for removing contaminants like PPS and POM, as well as for eliminating the sticking of release agents!

The "plasticizers" contained in the dirt and contaminants on molds can shorten the lifespan of the molds if left unattended. By using the mold cleaning machine, Kripika Ace, you can perfectly remove the layer of dirt attached to the molds in a short time and without damage! 【Kripika Ace for these types of dirt】 ● Gas burning and gas tar ● Resin contaminants ● Rubber contaminants ● Oxide films ● Rust stains and light rust ● Contaminants on the breaker plates of extrusion molding machines 【User Testimonials】〇 I was able to easily clean the stubborn release agent that I had given up on. I tried various cleaning methods, but none were effective in removing the dirt. Therefore, even before seeing the demonstration of Kripika Ace, I believed that the dirt could not be removed. However, I was truly surprised that the stubborn release agent could be easily cleaned, and I immediately decided to purchase it. Since introducing Kripika Ace, the frequency of maintenance has decreased, and it has been a great help from the perspective of quality control. (Factory Manager, Company U, Okayama Prefecture) 【See for yourself!】 Somax is currently conducting free cleaning tests! Please feel free to contact us.

Company：ソマックス
Price：Other

Other cleaning machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Packed with tips for mold maintenance!

I have summarized common mistakes in mold cleaning and surprising facts that even the person in charge may not know.

"Even if you apply rust prevention agents and store them, the molds will still rust during storage." "Old molds do not have a longer shot count compared to new ones." Aren't you just accepting these things as common knowledge? By using a completely different approach, it is possible to overturn the common knowledge of the past. Moreover, just by changing the methods of mold maintenance, you can achieve: ■ Cost reduction ■ Time savings ■ Streamlining of maintenance ■ Quality improvement ■ Enhanced safety ■ Energy savings, etc. We provide easy-to-understand examples that connect to corporate profits using illustrations and images. *For more details, please download the brochure or contact us.

Company：ソマックス
Price：Other

Other cleaning machines
Ultrasonic Cleaner
Plastic Mould

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ways to Reduce the Frequency and Time of Mold Maintenance [Explained with Manga]

Increase the operating rate of molding machines! Introducing methods and equipment to significantly reduce maintenance time and molding defects.

Our company offers a variety of products designed to reduce issues such as molding defects, including the mold cleaning machine "Kuripika Ace," which removes dirt without damaging molds, and the mold temperature control pipe cleaning machine "Water Reamer," which dissolves and removes deposits caused by rust and impurities in water within the cooling pipes. ◎ We are currently offering a free document that explains methods and equipment that lead to the rationalization of mold maintenance in detail through "manga"! Using frequent troubles on-site as examples, we explain how to reduce the frequency of mold maintenance and lower maintenance costs through manga! (You can view it from "Download." Related product documents are also available.) 【Features of the listed products】 Mold cleaning machine "Kuripika Ace" ■ Completely removes corrosive substances attached to molds in a short time ■ Effective regardless of the number, shape, or area of mold parts ■ Makes molds less prone to corrosion, restoring them to a like-new steel color Mold temperature control pipe cleaning machine "Water Reamer" ■ Allows for cleaning and rust prevention measures simultaneously ■ No need to disassemble the mold. No dust generation during cleaning ■ No need for rinsing or neutralization after cleaning

Company：ソマックス
Price：Other

Other cleaning machines
Other surface treatment equipment
Plastic Mould

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

The tape residue from the syringe has been perfectly removed! [Case Study]

Introducing a rare cleaning case of the mold cleaning machine, Kripika Ace!

We would like to introduce a case study from a company that manufactures medical devices such as syringes! They were struggling to remove tape marks and oil stains from the syringe (cylindrical) bundles before processing. Therefore, they tried cleaning with Kuripika Ace, which had already been introduced in other departments, and found that both the tape marks and the degreasing were perfectly removed! All of our employees learned a great deal from this usage method that we had never imagined.

Company：ソマックス
Price：Other

Other cleaning machines
Ultrasonic Cleaner
Other molds

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Would you like to have a free demo in the mold cleaning test room of Somax Co., Ltd.?

Create cleaning test reports with fully equipped facilities! Would you like to clean molds in the cleaning test room of Somax Co., Ltd.?

Somax Corporation is currently conducting free demonstrations in our "Cleaning Test Room," where customers are invited to visit. 【Well-Equipped Test Room and Analysis Equipment】 In addition to our mold cleaning machine, the Cripica Ace, we offer a range of mold maintenance equipment, including: - Electron microscopes - Optical microscopes - Laser microscopes - X-ray analysis equipment and more, all equipped for analysis! We can conduct test cleaning with large cleaning machines and observe large-sized molds that cannot fit on a desk. The cleaning tests will be handled by experienced staff. Additionally, we will prepare a cleaning test report. You can apply for a free demonstration in the cleaning test room through our website. We also welcome inquiries just to hear more about our services! ▼ Request a free demo here https://www.somax.co.jp/demonstration/form/ For more details, please check our catalog, which is available for free download. Feel free to contact us!

Company：ソマックス
Price：Other

Other molds
Other cleaning machines
Ultrasonic Cleaner

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

The black stains, cutting oil, and rust on lost-wax castings have been removed! [Case Study]

To companies engaged in the manufacturing of lost-wax precision castings! We would like to introduce a cleaning case of the mold cleaning machine, Kripika Ace!

【Concerns of Companies Engaged in Lost Wax Precision Casting】 ● It takes 120 minutes for each cleaning. ● We tried ultrasonic cleaning machines, but were not satisfied with the cleaning power. ● Reducing defective products due to insufficient cleaning and the time spent on re-cleaning was a challenge. 【The Deciding Factors for Implementation were "Cleaning Power" and "Time Savings"】 When cleaning with Kuripika Ace: ● Stains that could not be removed by ultrasonic cleaning machines, as well as black stains, cutting oil, and rust that were difficult to remove, were eliminated! ● Defects in plating and painting were reduced! ● Cleaning time was also halved, leading to the decision to implement it!

Company：ソマックス
Price：Other

Other cleaning machines
Ultrasonic Cleaner
Other molds

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cleaning the textured mold! Mold cleaning machine, Cripika Ace.

Remove dirt adhered to the textured mold with the artisan's technique!

Aren't you giving up!? Dirt stuck to the textured surface of the mold can cause defects in molding! It may affect the molded products, causing glossiness or uneven transfers. With the mold cleaning machine, Kuripika Ace, dirt is removed with expert technology!! The texture's unevenness is restored! If you have concerns such as the inability to re-texture individual parts due to controlled texture specifications, or if you want to internalize the maintenance of textured molds, we can solve those problems!

Company：ソマックス
Price：Other

Other molds
Ultrasonic Cleaner
Other cleaning machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

An era of mold maintenance without hassle or time investment through in-house production!

Save not only outsourcing costs but also time with in-house production!

■Case Studies <Resolving Outsourcing Costs with In-House Production!> "We were concerned about the impact of the resin we were using, and due to the high frequency of outsourcing maintenance, we were incurring significant costs each month. Therefore, we introduced the Kuripika Ace for in-house production. We were able to save on outsourcing costs. We can cover the lease costs of the cleaning machine sufficiently." (Company S, Aichi Prefecture) <Maintenance Time Has Been Reduced!> "We used to spend a lot of time on manual maintenance for detailed areas, but with the Kuripika Ace, we were able to clean the mold in a short time, reaching every corner, including inside holes and deep grooves. The time to clean one mold was reduced by eight hours." (Company N, Ibaraki Prefecture) 【In-House Maintenance for Textured Mold Surfaces】 With the Kuripika Ace, we can completely remove dirt that has settled into the fine irregularities of textured surfaces, which are difficult to maintain! Since it does not scratch the textured surface, there is no worry about damage. This extends the lifespan of the mold, reducing the costs of reworking textured surfaces! 【A Mold Cleaning Machine That Anyone Can Use】 We can standardize the mold maintenance criteria that were not standardized before. With the Kuripika Ace, a mold cleaning machine that can restore molds to their new steel color regardless of who operates it, we can bring mold maintenance in-house!

Company：ソマックス
Price：Other

Other molds
Ultrasonic Cleaner
Other cleaning machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Remove rust and deposits from the mold cooling water pipes!

Numerous cases are presented where the flow rate of mold cooling water increased fourfold and the surface temperature was restored to -11°C, dramatically improving the cleaning process!

The "Water Reamer" is a pipe cleaning machine that removes layers of rust and impurities deposited in the mold temperature control piping, improving cooling efficiency. No rinsing or neutralization treatment is required after cleaning, and it employs a revolutionary cleaning method that forms a primary anti-rust coating through an air blow drying system.

Company：ソマックス
Price：Other

Other cleaning machines
Other surface treatment equipment
Plastic Mould

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

The concept of "preventive maintenance."

A new habit before storing molds!

Preventing corrosion of molds during storage and preventing mold-related issues. This is what I consider to be mold preventive maintenance! The mold temperature control piping cleaning machine "Water Reamer" is a rust removal cleaning machine that removes layers of rust and accumulated impurities from the water contained in the temperature control piping, restoring cooling efficiency.

Company：ソマックス
Price：Other

Other cleaning machines
Ultrasonic Cleaner

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shibo Mold "Mold Cleaning Machine Kuripika Ace" [Cleaning Case Studies]

Dirt that causes shine. With the mold cleaning machine "Kuripika Ace," it can be perfectly removed without any damage!

＼You can save the hassle of re-texturing!／ The mold cleaning machine "Kuripika Ace" is compatible with molds that have a textured finish. 【Suitable for the following types of dirt】 ● Dirt that has penetrated the fine uneven surfaces of textured areas 【User Testimonials】〇 Maintenance of textured and mirror-finished molds has become in-house. Textured and mirror-finished molds are prone to scratches, so we used to outsource re-texturing and re-polishing every time there was a molding defect. Thanks to "Kuripika Ace," we can now handle maintenance in-house, reducing time and overhaul costs such as reprocessing fees, which has extended the lifespan of our molds. (Manufacturing Department Manager, Company F, Kanagawa) ＼Please verify the cleaning power with your own eyes!／ We will visit factories across Japan to conduct demonstrations. Online demonstrations are also available.

Company：ソマックス
Price：Other

Ultrasonic Cleaner
Other cleaning machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Multipurpose sink

With various combinations of options such as multi-channel tanks and ultrasonic features, you can create the sink of your dreams!

The "Multipurpose Sink" is an ideal product for users of the Cripica Ace and companies looking for sinks. 【For Cripica Ace Users】 - Perfect height and sink size for the Cripica Ace - Improved work efficiency in the rinsing process after cleaning with the Cripica Ace - Multi-tank design allows for compatibility with three-tank systems and more 【For Companies Looking for Sinks】 - Can be used as a sink, rinsing tank, or air blow tank - Equipped with ultrasound, it can also be used as a two-tank ultrasonic cleaning machine - Achieve highly functional sinks by combining with various options For more details about the product and options, please download the catalog or contact us.

Company：ソマックス
Price：Other

Other physicochemical equipment
Other cleaning machines
Ultrasonic Cleaner

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mold Cleaning Machine "Kuripika Ace" *Manga materials provided

Wash multiple mold parts at once! Safe and secure mold cleaning without using organic solvents! Free comic materials on the dangers of organic solvents.

Using a mold cleaning spray that contains harmful "organic solvents," each mold part is maintained by hand one by one. ↓ With the safe and secure mold cleaning machine, Kuripika Ace, you can wash multiple mold parts at once! This reduces maintenance time! 【Conventional Mold Maintenance】 ● Very labor-intensive due to manual work ● Time-consuming and lacking manpower ● There are areas like the inner corners of molds that are hard to reach ● Hand polishing can cause scratches on the molds ● Concern about the burden on the body due to the use of organic solvents 【Mold Cleaning Machine 'Kuripika Ace'】〇 Automatically cleans molds arranged in a dedicated basket 〇 Cleans multiple molds at once 〇 Cleaning solution penetrates every corner of the mold and removes dirt 〇 Dirt is lifted and removed, causing no damage to the mold 〇 Uses a water-based cleaning solution with low environmental impact and contains no organic solvents We offer a lineup tailored to the size of the molds. *For details, please see "Lineup." : We have uploaded a comic about the dangers of organic solvents:

Company：ソマックス
Price：Other

Other cleaning machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Light guide plate mold, lens mold (Crispica Ace OPT) [Cleaning example]

Perfectly remove dirt from delicate molds coated with nickel plating using the optical component mold cleaning machine 'Cripika Ace OPT'!

＼No damage cleaning!／ The optical component mold cleaning machine 'Kuripika Ace OPT' perfectly removes dirt attached to delicate molds with nickel plating without causing any damage. 【Ideal for such dirt】 ● Gas burning and gas stains ● Resin residues 【User testimonials】〇 It does not damage the molds! I was surprised that even the slightest dirt hidden in micro-patterns was removed without damaging the molds during a cleaning test arranged by a business partner. Since our clients require brightness of light guide plates and precision of lenses, I am really glad we introduced 'Kuripika Ace OPT'. (Deputy President, Company S, Nagano Prefecture) ＼Please check the cleaning power with your own eyes!／ We will visit all over Japan to conduct demonstrations at your factory. Online demonstrations are also available.

Company：ソマックス
Price：Other

Other cleaning machines
Ultrasonic Cleaner
Other molds

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cleaning machine×ソマックス - List of Manufacturers, Suppliers, Companies and Products

Cleaning machine Product List

Optical Component Mold Cleaning Machine "Kuripika Ace OPT"

Removal of gas burns and residues such as resin from molds! 【Kuripika Ace Cleaning Case】

Packed with tips for mold maintenance!

Ways to Reduce the Frequency and Time of Mold Maintenance [Explained with Manga]

The tape residue from the syringe has been perfectly removed! [Case Study]

Would you like to have a free demo in the mold cleaning test room of Somax Co., Ltd.?

The black stains, cutting oil, and rust on lost-wax castings have been removed! [Case Study]

Cleaning the textured mold! Mold cleaning machine, Cripika Ace.

An era of mold maintenance without hassle or time investment through in-house production!

Remove rust and deposits from the mold cooling water pipes!

The concept of "preventive maintenance."

Shibo Mold "Mold Cleaning Machine Kuripika Ace" [Cleaning Case Studies]

Multipurpose sink

Mold Cleaning Machine "Kuripika Ace" *Manga materials provided

Light guide plate mold, lens mold (Crispica Ace OPT) [Cleaning example]

Search Keywords Related to Cleaning machine